Kenworth ag400 suspension ride height. Difference is ride height.

Kenworth ag400 suspension ride height. Then measure from rear axle, center of axle shaft (tapered hole in center) to ground. Difference is ride height. To set it, first ensure the vehicle is unloaded and on level ground. Apr 2, 2025 · The ride height on a Kenworth W900 with AG-400 suspension typically ranges from 13. P793 KENWORTH REAR AIRGLIDE SUSPENSIONS HOW TO MEASURE THE STATIC HEIGHT OF A KENWORTH AIRGLIDE SUSPENSION NOTE: STATIC HEIGHT MUST BE MEASURED AT THE OEM RECOMMENDED RIDE HEIGHT Ride height on the Kenworth AG400 suspension is the distance between the axle and frame, crucial for proper load distribution. First measure centered between tandems from bottom of frame to ground. This measurement can vary based. May 24, 2013 · What are the differences between the two? The 400 has a 9" ride height, the 460 has a 10. 5" ride height. Included is a detailed specifications page on configuration, rated capacity, ride height, axle spacing, intended service, trailer and body type, maximum gross combination weight, installed weight, lift axles and torque restrictions. Other than that is the rating just in the axle The air spring suspension uses air springs and mechanical connections to absorb shocks while automatically regulating air pressure to maintain normal ride height under different loads. Dec 1, 2003 · This brochure covers the AG400 and AG380 Series suspensions. 5 to 14. May 7, 2010 · Measure height on level ground. Routine inspection and maintenance is recommended at 60,000 mile intervals to check for leaks and worn components. 5 inches, depending on the specific configuration and load conditions. inc igjastcf peeuhq fyh cvngq cqxtnwgg wux ixwns yavle mabnjr